Loading... Please wait...

Blog

Posted

How to Install the Metal Parking Stand

Parts that you will receive:

  • one (1) large rubber washer
  • one (1) large metal washer
  • one (1) small washer
  • one (1) small lock washer
  • two (2) Philips head machine screws, one short and one slightly longer (short screw is missing from this image)
  • four (4) large set screws
  • one (1) multi-purpose tool
  • one (1) axel
  • two (2) pedestals
  • one (1) mounting bracket




    Slide the axel through the opening in the bottom of the mounting bracket.  Center to the best of your ability and mark the axel along the outer edges of the mounting bracket.




    Attach one of the pedestals to the axel using your mark as a guide.




    Attach one of the pedestals to the axel using your mark as a guide.  Using the multi-purpose tool secure with two (2) set screws.




    Slide the axel through the opening at the bottom of the mounting bracket and attach the remaining pedestal to the axel.  Secure with two (2) set screws.




    You should have the following items remaining, plus a short machine screw (short machine screw not shown in this image).




    Place a small lock washer on the short machine screw followed by the small metal washer.  Insert into the mounting bracket as shown below.




    Use a Phillips head screw driver to help you guide the short machine screw to the hole directly below the power button.  Loosely attach the mounting bracket (a couple of screwdriver turns).




    You need the bracket to be loose so you are able to slightly pull it back and away from the Ninebot.   




    Place a small lock washer on the longer machine screw followed by a small metal washer. 




    Insert into the mounting bracket as shown below.




    Pick up the large metal washer, and larger rubber washer and arrange as shown below.




    Place large washers on machine screw as shown below.




    Use a Phillips head screw driver to help you guide the short machine screw to the hole on the Ninebot One.




    Hand tighten each of the machine screws to secure the mounting bracket.

    Congratulations!  You have installed the Metal Parking Stand!






Changing the Gear Oil Ninebot PTR Elite and PTR E Plus

Changing the Gear Oil Ninebot PTR Elite and PTR E Plus (Ninebot Elite PTR left side gearbox after removing: hubcap, wheel assembly, and fender) Maintenance Periodicity: 3 Months or 1,243 miles (2,000km) 1 Year or 3,107 miles (5,000km) 2 Years or 6,214 miles (10,000km) 3 Years or 9,320 miles (15,000km) Then every  6 months or 1,864 miles (3,000km) Estimated time: 15 to [...]

Read More »


How to Install the Cargo Bag Accessory

This video will go over how to install the cargo bag accessory on your Ninebot Elite. This is a great accessory to have if you are going out on a long ride and want to bring some belongings with you.

Read More »


How to Install the Color Kit

In this weeks "How To" video we will be going over how to install the Color Kit on the Ninebot-C. This installation can be done to the wheels of your Ninebot Elite if you follow the instructions provided in the video. The Color Kit is available in Translucent lime green, Caribbean blue, and Wine red [...]

Read More »


How To Install The Bell Accessory

In today's video we will go over how to install the bell accessory on your Ninebot Elite. This is a great accessory to use if you like to go on rides through the park where you need to alert other pedestrians of your presence.

Read More »


How To Install The Headlight Accessory

Today's "How To" video will go over how to install the headlight accessory. Check out our Ninebot in the Dark video to see the headlight in action!

Read More »


How To Install The Bottle Cage Accessory

Today's video will go over how to install the bottle cage accessory on your Ninebot Elite. This is a great accessory to have if you are going out on a long ride and want to bring some water with you.

Read More »


How To Install Safety Laser Lights

In this weeks "How To" video we will be going over how to install safety laser lights on your Ninebot Elite. This installation can be done in under five minutes if you follow the instructions provided in the video. The laser lights can be used at night to illuminate your driving path for other people [...]

Read More »


How To Enter Power Assist Mode

Power assist mode is designed to help you carry your Ninebot up or down stairs.

Read More »


How To Upgrade Your Firmware

This video will go over how to upgrade your firmware on the Ninebot Elite. It is very important that you update your firmware whenever possible to ensure that your Ninebot is running efficiently.

Read More »