Replacement 10mm handlebar mounting screws compatible with the Segway-Ninebot ES1, ES2, ES3, and ES4 Series.
If you notice that the handlebar mounting screws are backing out due to vibration, we recommend that you use a very small amount of Loctite Threadlocker Blue 242. This will help to keep the screws from backing out.
There is also a 'Red' variant. The Red Loctite is permanent and should NOT be used on your scooter.
You can safely use the Loctite Threadlocker Blue 242 on any other screw(s) that you notice backing out on your scooter.
- 10mm Phillips Flat Head Screw
- Color is Black (Steel Balck Oxide)
- Includes two (2) 10mm screws