Genuine replacement Pre-tightening enfoldment pads. Pack of Ten (10).
If you notice that there seems to be excessive play, or a 'loose' or 'wobbly' feeling to front fork it may be that your enfoldment pads need to be tightened or replaced if they are missing.
The good news is that this is a simple and low cost fix that doesn't require any disassembly of the machine.
There are two (2) enfoldment pads on your scooter, both are located below the front fork assembly.
See the illustrated image for the pads location.
One pad is on the right side and the other on the left side. Each pad is held in place by a 3mm Hex Allen set-screw.
If you notice that either of the set-screws is backing out and needs to be tightened, we recommend that you use a very small amount of Loctite Threadlocker Blue 242. This will help to keep the set-screws from backing out due to vibration while riding.
There is also a 'Red' variant. The Red Loctite is permanent and should NOT be used on your scooter.
You can safely use the Loctite Threadlocker Blue 242 on any other screw(s) that you notice are backing out on your scooter.